3 Series E46 330xd (M57) SAL
Program improved transmission data status.
c)
X5 3.0dA
(Manufacturing period October 2001 to September 2003)
Program improved transmission data status.
In case of complaint 2:
330dA and 330XdA
(Manufacturing period September 2000 to February 2003)
Program improved transmission data status.
Note:
The data statuses were released at the same time as the series production status
and are available to the dealer organisation from DIS CD 33 to CD 38.
Programming is only to be carried out by manual entry.
Procedure:
Follow up customer complaints with a test drive. If the complaint is reproducible as
described, we recommend the following procedure:
In case of complaint 1:
a)
530dA
(Manufacturing period June 1999 to August 2000)
-
Replace torque converter
-
Replace oil strainer
-
Top up oil using new oil
Important:
On vehicles with transmission with transmission code VT, the current transmission
data status C5737 must also be programmed. The transmission code can be
found on the transmission type plate, immediately after the transmission serial
number, e.g. 224250RVT.
b)
530dA
(Manufacturing period September 2000 to August 2003)
-
Program transmission control unit with improved data status by manual input.
The procedure for manual programming is described in the enclosure.
The data required for manual programming is :
Vehicle type
Manufacturing period
Part number
Basic control
unit/programmed EGS
530dA
09/00 to 08/01
7 508 145 / 7 529 928
530dA *
09/01 until 08/02
7 518 709 / 7 542 324
530dA
09/02 until 08/03
7 518 709 / 7 528 840
*
For these vehicles, programming data are not available to the dealer organisation until
DIS CD version 38.
c)
X5 3.0dA
(Manufacturing period October 2001 to September 2003)
-
Program transmission control unit with improved data status by manual input.
SI Vibrations/humming noises in engine speed range of 1300 to 2100 rpm E46 330dA 33
BMW AG - TIS
15.02.2013 15:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
