3 Series E46 330xd (M57) SAL
Release clamp (1).
Tightening torque,
refer to Technical Data 11 65 10AZ.
Disconnect charge air pipe (2).
Caution!
The openings on the turbocharger must be sealed
immediately.
Fit charge air hoses without grease and dry.
Release nut (1) on right and left engine support arm.
Tie line (1) to A/C compressor to one side with a cable tie (2).
Disconnect plug (1).
Release screws (2) on compressor.
Tie compressor (2) back to one side.
RA Removing and installing engine (M57)
BMW AG - TIS
15.02.2013 17:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -