3 Series E46 330xd (M57) SAL
Installation:
Worn rockers may only be reused on the same grooves of the
camshaft.
Oil camshaft bearings and bearing caps.
Install all finger rockers and compensating elements.
Note:
E
Inlet camshaft
A
Exhaust camshaft
Install camshafts.
The inlet camshaft bearing covers are marked E 1 ... E 7 from
the exhaust side.
The exhaust camshaft bearing covers are marked A 1 ... A 7
from the exhaust side.
Fit bearing caps.
Insert all screws (1) and initially tighten so that they are free of
play.
Tighten down camshaft bearing caps in 1/2 turn increments evenly
from inside to outside.
Tightening torque, 11 31 1AZ
.
RA Removing and installing cylinder head (M57)
BMW AG - TIS
15.02.2013 17:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 13 -
