3 Series E46 330xd (M57) SAL
Note:
Worn rockers may only be reused on the same grooves of the
camshaft.
Remove finger rockers individually and check rollers for ease of
movement.
Caution!
These screws must "not" be removed.
Installation:
Installation of camshafts is described separately from removal.
The assembly sequence differs between removal and installation.
Note:
Before installing camshafts, lubricate bearings and bearing
covers.
Note:
Worn rockers may only be reused on the same grooves of the
camshaft.
RA Replacing camshafts (M57)
BMW AG - TIS
15.02.2013 17:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
