3 Series E46 330xd (M57) SAL
11 31 091
Removing and installing/replacing hydraulic
chain tensioner (M57)
Special tools required:
•
11 3 340
Remove front timing case cover.
Press clamping rail (1) in direction of arrow and insert special
tool 11 3 340 into chain tensioner (3).
Loosen screws (2).
Remove chain tensioner (3).
Warning!
Tensioner pistons are under spring pressure.
Risk of injury during removal of plug mandrels.
RA Removing and installing/replacing hydraulic chain tensioner (M57)
BMW AG - TIS
15.02.2013 17:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -