3 Series E46 330xd (M57) SAL
Installation:
Insert retaining clip (1) of sealing cover (2) on heat shield.
Installation:
Clip in three seal plugs (1) from above.
Release screws (1).
Installation:
Apply a light coat of copper paste (CRC) to screw threads,
refer to BMW Parts Service.
Tightening torque,
refer to Technical Data 11 65 1AZ.
Installation:
Clean sealing faces.
Replace gasket (1).
RA Removing and installing, sealing/replacing exhaust manifold (M57)
BMW AG - TIS
15.02.2013 18:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
