3 Series E46 330xd (M57) SAL
Remove sealing cover (1) from heat shield.
Pull out seal plugs.
Installation:
The retaining clip (1) on the sealing cover (2) must be inserted
on the heat shield.
Installation:
Replace damaged seal plugs.
Insert three seal plugs (1) from above.
Release screws (1).
Tightening torque,
refer to Technical Data 11 65 1AZ.
Installation:
Apply a thin coat of copper paste (CRC) to screw (1) threads,
RA Removing and installing or replacing exhaust turbocharger (M57)
BMW AG - TIS
15.02.2013 18:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
