bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

5 RA Removing And Installing_replacing Alternator Mounting Block (M57 _ M47TU) > < 4 RA Removing And Installing_replacing Alternator (M57)|Page 776
Page 4
background image

Release screw (1).

Remove guide pulley (2).

Rear drive:

Release bolts (1) on alternator.

Remove retaining bracket (2).

Remove alternator towards bottom.

Four-wheel drive:

Release bolts (1) on alternator.

Remove alternator towards top.

Rear and four-wheel drives:

Note:

Read out fault memory of DDE control unit.

Check stored fault messages.

Rectify faults.

Then clear fault memory.

RA  Removing and installing/replacing alternator (M57)

BMW AG - TIS

15.02.2013  18:24

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 4 -

5 RA Removing And Installing_replacing Alternator Mounting Block (M57 _ M47TU) > < 4 RA Removing And Installing_replacing Alternator (M57)|Page 776