bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Replacing Preheating Valve (M57)|Page 833 > < 2 RA Replacing Fuel Filter (M57)|Page 831
Page 1
background image

13 32 070

Replacing preheating valve (M57)

Caution!

Turn off ignition.

Caution!

When working on the oil, coolant or fuel circuit, you must
protect the alternator against contamination.

Cover alternator with suitable materials.

Failure to comply with this procedure may result in an
alternator malfunction.

Recycling:

Catch and dispose of escaping fuel.

Observe country-specific waste-disposal regulations.

Loosen screws (1).

Tightening torque,

refer to Technical Data 13 32 3AZ.

Remove air duct (2).

Release clamps (3).

Detach fuel lines from fuel filter unit.

Disconnect plug (4).

Release screws (5).

Lay bracket (6) upwards.

RA  Replacing preheating valve (M57)

BMW AG - TIS

15.02.2013  18:44

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Replacing Preheating Valve (M57)|Page 833 > < 2 RA Replacing Fuel Filter (M57)|Page 831