3 Series E46 330xd (M57) SAL
Protect torque converter from slipping out. To do so, insert special
tool 24 4 131 / 24 4 135 in opening in transmission housing.
Clamp torque converter.
Support engine at front with a hydraulic lifter.
Release screws.
Tightening torque, 24 00 1AZ.
Pull off transmission from engine towards rear and lower it.
Installation:
Pay attention to adapter sleeves (1 and 2).
Withdraw damaged adapter sleeves from transmission housing.
Insert new adapter sleeves into engine block.
RA Removing and installing automatic transmission (A5S 360R / 390R, 4WD, M57)
BMW AG - TIS
15.02.2013 20:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
