3 Series E46 330xd (M57) SAL
31 10 020
Removing and installing/replacing left or right
adapter (AWD)
Necessary preliminary tasks:
•
Remove underbody protection
•
Remove right heat shield from front axle carrier
Support front axle carrier with workshop jack.
Slacken left and right screws (1) a few turns.
Remove left and right screws (2).
Installation:
Check threads for damage; if necessary, repair with Helicoil thread
inserts.
First tighten down screw (1) - tapered connection paint-free.
Tightening torque 31 10 1AZ
(bolt (1)).
Tightening torque 31 10 11AZ
(bolt (2)).
Lower workshop jack.
Unfasten screws.
Remove adapter (1).
Installation:
Check threads for damage; if necessary, repair with Helicoil thread
inserts.
Tightening torque 31 10 10AZ
.
RA Removing and installing/replacing left or right adapter (AWD)
BMW AG - TIS
15.02.2013 21:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -