3 Series E46 330xd (M57) SAL
32 41 060
Removing and installing vane pump for power
steering (M57, M57TU)
Important!
Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.
Seal off pipe connections with plugs.
Necessary preliminary tasks:
•
Draw off and dispose off hydraulic fluid from fluid reservoir
•
Slacken drive belt and remove from belt pulley
Remove pulley.
Disconnect return line (1) from fluid reservoir.
Disconnect pressure line (2) from vane pump.
Installation:
Replace sealing ring.
Tightening torque 32 41 3AZ
.
Unfasten screws.
RA Removing and installing vane pump for power steering (M57, M57TU)
BMW AG - TIS
15.02.2013 22:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
