3 Series E46 330xd (M57) SAL
-
Stop screw with round plastic head:
If a stop screw with a round plastic head is fitted, remove this
plastic head (otherwise there may be grating noises).
Cut or grind off round plastic head, taking care not to damage
adjoining body parts.
If necessary, remove stop screw and then remove round plastic
head.
It is not possible to fit a protective cap on a screw with a round
head!
The stop screw thus has a flat head, enabling the protective cap to
be fitted.
Use the adjustment instructions for the stop screw with protective
cap.
-
Adjustment instructions for stop screw with protective cap:
If a stop screw (2) with protective cap (1) is fitted, the following
adjustment instructions apply:
Remove protective cap (1).
RA Adjusting trunk lid to fit
BMW AG - TIS
16.02.2013 01:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
