3 Series E46 330xd (M57) TOUR
Feed adapter wire set (a) through grommet (1) and route it to the
electronics box. Seal the bushing.
Secure adapter wire set (a) with cable ties at a suitable point.
Clip cable holder (e) with connecting element (d), see illustration
S12 03 001, for adapter wire set (a) to the vacuum hose from
brake servo (2).
Feed adapter wire set (a) through grommet (1) and into the
electronics box. Seal the bushing.
Open the middle connector X2413, disconnect pins 20, 33 and 35
and tie back.
Connect the wires of adapter wire set (a) to the pins as follows:
BRGN (brown/green) wire to pin 20
BLSW (blue/black) wire to pin 33
WSGE (white/yellow) wire to pin 35
Plug on connector.
SI Installation instructions for adapter wire set, E46 M57
BMW AG - TIS
15.02.2013 18:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -