bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Replacing Fuel Filter (M57)|Page 832 > < 1 RA Removing And Installing_replacing Fuel Cooler (M57)|Page 830
Page 1
background image

13 32 051

Replacing fuel filter (M57)

Caution!

Switch off ignition.

When working on the oil, coolant or fuel circuit, you must
protect the alternator against contamination.

Cover alternator with suitable materials.

Failure to comply with this procedure may result in an
alternator malfunction.

Recycling:

Catch and dispose of escaping fuel.

Observe country-specific waste-disposal regulations.

Disconnect plug (2).

Release screw (1).

Remove pressure sensor (3) on fuel filter unit.

Release clamps (4) and detach fuel lines.

Release screw (5).

Pull out fuel filter unit (6).

Installation:

Replace complete pressure sensor if sealing ring (1) is damaged.

RA  Replacing fuel filter (M57)

BMW AG - TIS

15.02.2013  22:09

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Replacing Fuel Filter (M57)|Page 832 > < 1 RA Removing And Installing_replacing Fuel Cooler (M57)|Page 830