3 Series E46 330xd (M57) TOUR
Fit SAC clutch (1) on flywheel.
Pay attention to dowel pins (2).
SAC clutch (1) must be secured by way of dowel pins (2).
Install retaining screws of SAC clutch and tighten down.
Tightening torque: 21 21 1AZ
.
Release spindle (1) until tension is completely removed from
diaphragm spring (2).
Release knurled screw (1) and remove special tool 21 2 170
from SAC clutch.
Release knurled screws (2) and remove special tool 21 2 180
from SAC clutch.
RA Removing and installing or replacing clutch (SAC 240 / 4 cyl. M47TU/T2 only, 6,
BMW AG - TIS
15.02.2013 23:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 11 -