3 Series E46 330xd (M57) TOUR
Important!
The wheel bearing is destroyed when the drive flange is
removed and must not be reused!
Lift out retaining ring (1).
Pull out bearing with special tools 31 2 113 , 33 3 261 ,
33 3 262 and 33 3 266 .
Note:
The bearing can be forced out of the swivel bearing on a press.
Important!
Press-fit areas must be kept clean and free of oil and grease!
Coat bearing seat in swivel bearing over 50 % of its length
with Loctite 638.
Wider chamfer of bearing must point to swivel bearing!
Clean press-fit area of new bearing.
Clean bearing seat in swivel bearing and coat over 50 % of its
length with Loctite 638.
Important!
Wider chamfer (1) of bearing must point to swivel bearing!
RA Replacing bearing for front wheel (AWD)
BMW AG - TIS
16.02.2013 00:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -