3 Series E46 330xd (M57) TOUR
![background image](/bmw/3_Series_E46/330xd_M57_TOUR/page-895008.png)
Place a strip of paper (normal writing paper) (1) between stop
screw (2) and stop on hood lid hinge.
Close hood lid.
While doing so, make sure paper strip remains between stop
screw and stop on hood lid hinge.
The stop screw is correctly adjusted when the paper strip (1) can
be pulled out "with suction".
This adjustment is made by turning the stop screw.
If the paper strip can be pulled out "with suction", unscrew the stop
screw (1) by measurement (B).
Measurement (B) = 1.0 mm, corresponding to 1.0 turns.
RA Aligning hood lid
BMW AG - TIS
16.02.2013 04:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -