bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

67 RA Notes On Handling Wiring Harnesses And Cables > < 66 RA Checking_topping Up Fluid Level In Automatic Transmission (A5S 360R_390R)
Page 2
background image

Move selector lever to parking position "P".

The vehicle must be horizontal and secured against rolling off.

Connect BMW Diagnosis and Information System (DIS) to vehicle.

Undo oil filler plug (1).

Top up automatic transmission fluid until it flows over.

Screw in oil filler plug (1) by hand.

Start engine and run at idle speed.

Operate brake and, with engine at idle speed, change up and
down all gears several times.

Release oil filler plug (1) again.

Increase temperature of transmission fluid to 30 ... 50 

°

C.

Interrogate temperature of automatic transmission fluid with BMW
Diagnosis and Information System.

Top up automatic transmission fluid until it flows over.

Screw in oil filler plug (1).

Tightening torque 24 11 7AZ

.

Installation:

Check sealing ring of oil filler plug (1) for damage and if
necessary replace sealing ring and filler plug (1).

RA  Checking/topping up fluid level in automatic transmission (A5S 360R/390R)

BMW AG - TIS

15.02.2013  22:19

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

67 RA Notes On Handling Wiring Harnesses And Cables > < 66 RA Checking_topping Up Fluid Level In Automatic Transmission (A5S 360R_390R)