3 Series E46 330xd (M57TU) SAL
Note:
M57TU AWD
Unfasten plug connection (1) and disconnect.
Release hose clamps (2) and detach fuel hoses (3) from fuel
pump (4).
Remove fuel pump (4) with damping ring (5)
Installation:
Check and if necessary replace damping ring (5).
Replace hose clamps.
Tightening torque, 16 12 7AZ
Installation:
To vent fuel system:
Turn on ignition and leave on for approx. 1 minute. In this period
of time, the fuel pre-supply pump is activated and the fuel line to
the H.P. pump vented.
RA Removing and installing/replacing diesel pump (supplementary delivery pump)
BMW AG - TIS
15.02.2013 23:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
