3 Series E46 330xd (M57TU) SAL
Installation:
Insert rubber gaiter with arrow in direction of travel towards
front.
Installation:
Grease selector lever ball.
Grease,
refer to BMW Service Operating Fluids.
Install selector lever in selector arm.
Aligning mounting:
-
Arrows on mount in longitudinal axis of vehicle.
-
Retaining lugs of mount, transverse to direction of travel.
Installation:
Press mounting in area of retaining lugs into selector arm until
it snaps audibly into place.
Installation:
Pull inner rubber gaiter over pot on selector arm.
Button rubber gaiter into body aperture.
RA Removing and installing selector lever (AWD)
BMW AG - TIS
16.02.2013 01:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
