3 Series E46 330xd (M57TU) SAL
51 12 000
Removing and installing complete rear
bumper (from 09.01)
Loosen screws (1).
Release screws (2) on impact absorber.
Installation:
Tightening torque: 51 12 2AZ.
Caution!
In the following work step, the link (1) on the catch must not
be damaged.
Carefully press detent lug (1) downwards.
Detach bumper.
Installation:
If necessary, carefully press detent lug (1) upwards.
Lift out wheel arch liner (1).
Pull bumper (2) straight towards rear.
If necessary, disconnect plug connections on PDC sensors.
RA Removing and installing complete rear bumper (from 09.01)
BMW AG - TIS
16.02.2013 06:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
