bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

35 SWS Tester For Engine Cooling System All Series > < 33 SWS Drift For Flange Sleeve Transmission_ S5D 260Z_280Z_310Z_320Z, GS5-39Z
Page 1
background image

VS-23/Caris

Register/Index: 1

1 09 02 (906)

Vertrieb D
KDL d. VGs u.
Imp. z. Info

Datum/Date:
09/2002

Testing device for high-pressure pump

M47TU, M57TU

Situation:

Testing device 13 5 450 has been developed for performing diagnosis on the high-
pressure pump "CP3.2" during the starting process. 
The subject of troubleshooting on the high-pressure pump using testing device 13 5 450
is described in SI 13 01 02 (865)

 "Examination of fuel high-pressure system (engine

does not start)". 
The new high-pressure pump "CP3.2" has been installed since the introduction of the
M47TU in September 2001 and of the M57TU in September 2002. The high-pressure
pump "CP3.2" supersedes the previous first-generation pump "CP1".

Procedure:

Store tools will only be supplied to order. 
Please refer to Enclosure 1.

SWS  Testing device for high-pressure pump M47TU, M57TU

BMW AG - TIS

16.02.2013  21:23

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

35 SWS Tester For Engine Cooling System All Series > < 33 SWS Drift For Flange Sleeve Transmission_ S5D 260Z_280Z_310Z_320Z, GS5-39Z