3 Series E46 330xi (M54) SAL
11 28 010
Replacing alternator drive belt (M52 / S52 /
M52TU / M54 / M56)
Note:
If the drive belt is to be subsequently reused:
Mark direction of travel and reinstall drive belt in same direction of
travel.
Necessary preliminary tasks:
•
Remove fan clutch with fan impeller
•
Remove A/C compressor drive belt
•
E85/E60: Remove radiator cover
•
E85/E60: Remove fan cowl
Remove cap from tensioning roller.
Relieve tension on belt drive.
Remove drive belt.
Important!
Drive belt must be replaced if fouled with hydraulic fluid.
Installation:
Check drive belt for coolant and oil residues, replace if necessary.
Installation:
Check that belt is correctly positioned on belt pulleys.
RA Replacing alternator drive belt (M52 / S52 / M52TU / M54 / M56)
BMW AG - TIS
16.02.2013 06:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -