3 Series E46 330xi (M54) SAL
Press down secondary chain tensioner at top and remove special
tool 11 3 292 .
Preload tensioning rail with special tool 11 4 220 by rotating
adjusting screw with special tool 00 9 250 or standard torque
wrench to 0.7 Nm.
Preload cup spring slightly by pressing on sensor gear (1) and
tighten nuts by hand.
Important!
Do not tighten down nuts fully.
Remove gasket.
Check dowel sleeves (1) for damage and correct installation
position.
Keep sealing face clean and free of oil.
RA Replacing camshaft (M52TU / M54 / M56)
BMW AG - TIS
16.02.2013 06:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 17 -
