3 Series E46 330xi (M54) SAL
24 31 151
Removing and installing/replacing
transmission oil screen (A5S 325Z)
Note:
After completing work, top up ATF level.
Check/top up fluid level in automatic transmission,
refer to 00 11 500.
Transmission oil sump removed.
Remove and install transmission oil sump,
refer to 24 11 003.
It is absolutely essential to use the approved automatic
transmission fluid in this automatic transmission,
refer to BMW Operating Fluids MG24.
Failure to comply with this requirement will result in serious
damage to the automatic transmission!
Release screws (1).
Pull transmission oil screen (2) towards bottom and remove.
Installation:
Coat sealing ring with ATF.
Tightening Torque,
refer to Technical Data 24 31 2AZ.
RA Removing and installing/replacing transmission oil screen (A5S 325Z)
BMW AG - TIS
16.02.2013 09:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
