3 Series E46 330xi (M54) SAL
31 51 015
Replacing radial seal on left output shaft
Special tools required:
•
31 5 130
After installation:
•
Check front differential oil level, correct if necessary
Note on E53:
Output shaft is not pressed out of drive flange.
Output shaft (1) and swivel bearing (2) remain together as a
single unit during removal and installation.
Note on E46:
Remove control arm from front axle support.
RA Replacing radial seal on left output shaft
BMW AG - TIS
16.02.2013 10:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -