3 Series E46 330xi (M54) SAL
51 24 130
Removing and installing/replacing striker for
rear lid lock
Lever out trims (1).
Unfasten screws (2).
Raise trim (1) slightly and remove rear lid lock (2) (rear lid lock
lower section).
Installation:
Adjust rear lid lock.
Important!
Striker and rear lid lock must not be greased.
RA Removing and installing/replacing striker for rear lid lock
BMW AG - TIS
16.02.2013 15:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -