bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

12 RA Removing And Installing _ Replacing Rear Panel On Left Or Right Front Seat Backr|Page 2709 > < 11 RA Removing And Installing_replacing Seat Angle Adjuster (normal_manual) On Left Or|Page 2707
Page 1
background image

52 13 198

Removing and installing / replacing rear panel
on left or right front seat backrest
(normal/manual)

Remove front seat.

Release clips (1) with side cutting pliers.

Note:

Remove clip remainders.

Carefully pull cover (1) with piping (2) out of groove in rear panel
(3).

Installation:

The cover piping (1) has a marking (2) which must line up with
hole (3) in rear panel groove (4).

From marking (2), press in piping (1) completely to left and right at
bottom.

Five new repair clips must be fitted after each disassembly.

RA  Removing and installing / replacing rear panel on left or right front seat backr

BMW AG - TIS

16.02.2013  16:37

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

12 RA Removing And Installing _ Replacing Rear Panel On Left Or Right Front Seat Backr|Page 2709 > < 11 RA Removing And Installing_replacing Seat Angle Adjuster (normal_manual) On Left Or|Page 2707