3 Series E46 330xi (M54) TOUR
Installation:
Note:
For installation of the outside handle, the lock mechanism must be
in the "installation position".
"Installation position":
Distance between mounting (1) of lock actuator (2) and outer door
plate must not exceed measurement (A).
A
< 8 mm
If measurement (A) is greater, pull mounting (1) outwards with
your finger until measurement (A) is obtained.
Insert outside handle (1).
Raised seal (2) must not be squashed by outside handle (1).
Coupé/convertible:
Lever out sealing cap (1) for following adjustment.
RA Removing and installing/replacing outside handle on left or right front door (fr
BMW AG - TIS
16.02.2013 16:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -