3 Series E46 330xi (M54) TOUR
61 62 090
Removing and installing/replacing shaft
bearing for rear window wiper (Touring)
Necessary preliminary tasks:
•
Remove rear window wiper arm
•
Remove trim on shaft bearing
Secure rear window button (2) against falling down.
Unscrew nut (1).
Tightening torque 61 62 7AZ
.
Disconnect plug for rear window button.
Release nut (1) and withdraw shaft bearing (2).
Tightening torque 61 62 1AZ
.
RA Removing and installing/replacing shaft bearing for rear window wiper (Touring)
BMW AG - TIS
16.02.2013 19:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -