3 Series E46 M3 CSL (S54) COUPE
•
Remove lower microfilter section (E46 only)
•
Remove ignition coil cover
•
Remove ignition coils
•
Remove all spark plugs
Note:
Check that sealing ring is in perfect condition on special tool
11 0 235 .
Screw special tool 11 0 235 by hand into spark plug thread and
connect special tool 11 0 224 .
Depress accelerator and actuate starter until compression stops
rising.
Compression pressure.
Now clear the fault memory.
RA Checking compression of all cylinders (S54)
BMW AG - TIS
16.02.2013 14:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -