3 Series E46 M3 CSL (S54) COUPE
Note:
Sliding rail (1) is screwed to cylinder head.
Release screw (2).
Release screws between cylinder head and timing case cover.
Remove cable holder (1).
Release cylinder head bolts from outside to inside in sequence 14
to 1.
Lift off cylinder head.
Installation
Installation of cylinder head is described separately from removal.
Clean sealing faces of cylinder head and engine block; if
necessary, remove traces of gasket with hardwood spatula. Make
sure no gasket remnants drop into oil and cooling channels.
RA Removing and installing/sealing cylinder head (S54)
BMW AG - TIS
16.02.2013 14:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
