3 Series E46 M3 CSL (S54) COUPE
Caution!
Feed in vibration damper (1) behind belt pulley (2) of water
pump.
Installation:
Attach vibration damper and align to dowel pin.
Note:
A washer is installed under screws (1).
Replace screws (1).
Note:
Feed in special tool 11 0 280 behind tensioning roller and
support on mounting bracket of A/C system.
Mount special tool 11 0 280 on vibration damper.
Installation:
Tighten down screws on vibration damper with special tool
00 9 120 .
Tightening torque, 11 23 2AZ.
Installation:
Install belt pulley.
Tighten down screws.
Tightening torque, 11 23 3AZ.
RA Removing and installing/replacing vibration damper (S54)
BMW AG - TIS
16.02.2013 15:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
