3 Series E46 M3 CSL (S54) COUPE
Replace seal (1).
Important!
Note direction of installation of gasket.
Install gasket (1) in such a way that beading points to
VANOS adjustment unit.
Secure gasket (1) with sealing compound on adapter
sleeves.
Secure special tool 11 9 170 as shown in illustration by means
of stud bolt.
Note:
The special tool 11 9 170 serves to maintain a prespecified
distance during the below-mentioned installation of the VANOS
adjustment unit.
Turn spline hubs (1) of inlet and exhaust camshafts to right limit
position.
Note:
special tool 11 9 170 remains as a spacer element between
cylinder head and VANOS adjustment unit.
Attach VANOS adjustment unit.
RA Replacing camshafts (S54)
BMW AG - TIS
16.02.2013 15:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 23 -