3 Series E46 M3 CSL (S54) COUPE
12 14 521
Replacing pulse generator on crankshaft
(S54)
Turn off ignition.
Remove reinforcement plate on front axle support.
Important!
The section "Removing and installing reinforcement plate on
front axle support" contains important installation instructions.
Note:
Installation location of pulse generator for crankshaft is
underneath starter motor.
Unlock plug (1) and detach from distributor housing (2).
Note:
For a better overview, the intake air manifold is not shown.
RA Replacing pulse generator on crankshaft (S54)
BMW AG - TIS
16.02.2013 15:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -