3 Series E46 M3 CSL (S54) COUPE
12 14 523
Replacing pulse generator on inlet camshaft
(S54)
Special tools required:
•
12 1 120
Turn off ignition.
Remove intake air manifold.
Remove cable strip for fuel injectors with special tool 12 1 120 .
This operation is described in the section "Removing and installing
a fuel injector".
Release screw on pulse generator (1).
Disconnect pulse generator plug connection on connector strip.
Remove pulse generator (1).
Installation:
Tightening torque, 12 14 3AZ .
Check sealing ring of pulse generator for possible damage,
replace if necessary.
RA Replacing pulse generator on inlet camshaft (S54)
BMW AG - TIS
16.02.2013 15:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
