bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Replacing Battery Positive Lead (between Starter Motor And B- Support Point) (S5|Page 768 > < 2 RA Replacing Solenoid Switch
Page 1
background image

12 42 510

Replacing battery positive lead (between
starter motor and B+ support point) (S54)

Read fault memory. Switch off ignition.

Observe safety instructions for handling vehicle battery.

Remove front underbody protection.

Observe instructions for disconnecting and connecting battery.

Disconnect battery negative lead from battery and lay to one side.

Unclip battery positive lead from clips (1).

Feed battery positive lead out of cable duct.

Fold back protective cap (1).

Release nut (2).

Installation:

Tightening torque, 12 51 4AZ.

Disconnect battery positive lead (3) from connection point.

RA  Replacing battery positive lead (between starter motor and B+ support point) (S5

BMW AG - TIS

16.02.2013  16:12

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Replacing Battery Positive Lead (between Starter Motor And B- Support Point) (S5|Page 768 > < 2 RA Replacing Solenoid Switch