3 Series E46 M3 CSL (S54) COUPE
13 41 100
Removing and installing/replacing
supplementary air line (S54)
E46 only:
Necessary preliminary tasks:
•
Remove microfilter housing
This operation is described in the work step "Removing heater
bulkhead".
Press locks.
Detach engine ventilation hose.
M3 CSL only:
Open clamp (1) and detach hose (2).
Unlock plug connection (3) and disconnect.
Replacement only:
Release screws (4) and remove pressure sensor.
Detach vacuum hose (5) from supplementary air line (4).
Note:
For purposes of clarity, this operation is shown on the removed
engine.
RA Removing and installing/replacing supplementary air line (S54)
BMW AG - TIS
16.02.2013 16:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
