3 Series E46 M3 CSL (S54) COUPE
13 54 010
Adjusting basic throttle setting (S54)
Interrogate fault memory of DME control unit.
Switch off ignition.
Remove intake air manifold.
Caution!
Idle stops of throttle assemblies must not be altered! They
have been set at the factory and secured against turning with
locking paint.
Plastic caps (1) on stop screws must not be removed!
Checking basic throttle setting:
To ensure that the basic throttle setting at the 6th throttle
assembly can be properly checked, you must remove protective
cap (1).
Release nuts.
Remove protective cap (1) of throttle.
RA Adjusting basic throttle setting (S54)
BMW AG - TIS
16.02.2013 16:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -