3 Series E46 M3 CSL (S54) COUPE
18 32 005
Removing and installing/replacing catalytic
converter (S54)
Special tools required:
•
31 2 220
Warning!
Scalding hazard!
Only perform these tasks after exhaust system has cooled
down.
Remove underbody protection.
US version:
Catalytic converters are located in exhaust manifolds.
Remove and install both exhaust manifolds.
ECE version:
Release screws.
Unclip both plug connections (1) and disconnect.
Disconnect both plug connections.
Note:
Plastic holder with both cables of monitor sensors is removed with
catalytic converter.
RA Removing and installing/replacing catalytic converter (S54)
BMW AG - TIS
16.02.2013 17:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -