3 Series E46 M3 CSL (S54) COUPE
Installing new SAC:
Important!
Handle clutch disk carefully, do not touch surfaces of friction
pads.
Install clutch plate (1) in correct position.
Note designation for "engine side" / "transmission side".
Center clutch plate (1) with special tool 21 2 141 .
Important!
Pay attention to color marking when fitting SAC clutch with
balance marking.
Position color marking (1) on dual-mass flywheel and color
marking (2) on clutch pressure plate as closely as possible to
each other.
Max. possible angle error: 60
°
.
Note:
Fitting with balance marking from 04.2003.
RA Removing and installing or replacing clutch
BMW AG - TIS
16.02.2013 17:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 11 -