3 Series E46 M3 CSL (S54) COUPE
34 31 505
Removing and installing/replacing brake
master cylinder for DSC (M3)
Note:
Read and comply with General Information.
Remove air cleaner.
Bleed brake system after completing tasks.
Remove expansion tank.
Remove pressure sensor "V" for DSC.
Remove pressure sensor "H" for DSC.
Remove cover from electrical box.
Detach brake line (1).
Installation:
Tightening torque,
34 32 1AZ.
Pull wiring harness (4) out of partition wall.
Unscrew nuts (1).
Installation:
Replace self-locking nuts (1).
Tightening torque, 34 31 1AZ.
Withdraw brake master cylinder (2) from brake booster (3).
Installation:
Replace O-ring (1).
RA Removing and installing/replacing brake master cylinder for DSC (M3)
BMW AG - TIS
16.02.2013 20:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
