3 Series E46 M3 CSL (S54) COUPE
View of both welding spots (3) at engine support reinforcement (2)
and engine support front section (1).
This is shown on spare part.
The arrow indicates the view from the passenger compartment,
the bulkhead in front is not visible!
Engine support reinforcement (2) is welded to bulkhead.
Remove further remaining metal.
Straighten and grind joint surfaces.
Drill out engine support reinforcement (2) at new part engine
support front section (1).
Clean mating surfaces and drill holes for plug welding.
Caution!
To be able to carry out proper repairs, make following
changes to spare part engine support front section:
RA Replacing engine support front section on right
BMW AG - TIS
16.02.2013 21:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -