3 Series E46 M3 CSL (S54) COUPE
51 15 300
Removing and installing/replacing protective
strip in side panel, front left or right (Coupé)
Caution!
Front clip (1) is attached to protective strip (2) and cannot be
replaced.
Unclip front clip (1) with special tool 00 9 317 (trim panel
wedge).
Then unclip clips (3) and remove protective strip (2).
Installation:
Always replace front grommet (1) (leaks).
If necessary, lever out clips or rubber grommet (2) from side
panel.
Installation:
If necessary, replace faulty rubber grommets (1) and clips (2).
Attach clips with rubber grommet to protective strip and align.
Replace protective strip (4) if clip (3) is damaged.
Clip protective strip into door.
RA Removing and installing/replacing protective strip in side panel, front left or
BMW AG - TIS
16.02.2013 22:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -