3 Series E46 M3 CSL (S54) COUPE
65 77 016
Removing and installing airbag control unit
Warning!
Note airbag safety instructions!
Incorrect handling can activate airbag and cause injury.
Necessary preliminary tasks:
•
Remove storage compartment
•
Disconnect battery negative lead
Cut carpet (1) along premarked line and fold back.
Installation:
Secure carpet (1) to position (2) using cable strap.
Release nuts (2), tightening torque 65 77 1AZ
.
Raise airbag control unit.
Installation:
Before installing airbag control unit, make sure earth/ground cable
is resting on stud bolt (1).
RA Removing and installing airbag control unit
BMW AG - TIS
17.02.2013 03:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -