3 Series E46 M3 (S54) CONVER
Z3:
Remove cable duct from bulkhead.
Remove hose (1) for engine vent.
Remove sealing cap (2).
Remove ignition coil cover.
Disconnect plug connection (1) on sensor of exhaust camshaft.
Note:
Illustration shows: US version.
Installation:
The cables of the oxygen sensors are clipped into mounts on the
shield plate of the exhaust manifold.
Caution!
Ensure cables are exactly routed.
Caution!
It is very easy for the sealing ring between the cylinder head
cover and the return line to drop into the engine.
Carefully release hollow screw (1) and remove sealing ring
between cylinder head cover and return line.
Installation:
Replace sealing rings.
Tightening torque 25 Nm.
Detach grounding strap (2) for ignition coils from cylinder head.
RA Removing and installing, sealing cylinder head cover (S54)
BMW AG - TIS
16.02.2013 08:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
