3 Series E46 M3 (S54) CONVER
Replace sealing washer for screw (2).
Screw down sliding rail (1) with screw (2).
Check dowel sleeves (1) for damage and correct installation
position.
Replace sealing ring (2).
Install thrust bearing flange (1).
Install and tighten down screws.
Replace O-ring on pipe (3). Install pipe (3).
Install belt pulley (2).
Replace O-ring between thermostat housing (1) and water pump.
Replace O-ring between thermostat housing (1) and return pipe.
Install thermostat housing (1) with thermostat.
RA Removing and installing/sealing cylinder head (S54)
BMW AG - TIS
16.02.2013 08:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
