3 Series E46 M3 (S54) CONVER
Remove coolant pipe (1).
Installation:
Clean sealing surface.
Replace O-rings.
Release bearing pin (1) for tensioning rail (2).
Remove tensioning rail (2).
Installation:
Replace sealing ring.
Tightening torque of bearing pin (1) 13 Nm.
Remove exhaust and inlet rocker arm shafts.
Remove all valve springs.
Replace all stem seals.
Remove all valves.
RA Disassembling and assembling cylinder head - cylinder head removed (S54)
BMW AG - TIS
16.02.2013 08:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -