3 Series E46 M3 (S54) CONVER
Screw in special tool 11 2 380 until it is firmly connected to the
radial seal.
Remove radial seal by tightening in the screw.
Installation:
Caution!
Do not touch sealing lip of new radial seal with your fingers.
Fit special tool 11 7 240 on sprocket wheel.
Oil sealing lips of new radial seal (1).
Push radial seal (1) over special tool 11 7 240 until it rests
against timing case cover.
Remove special tool 11 7 240 .
Caution!
Do not touch sealing lip of new radial seal (1) when installing
special tool 11 5 090 .
Install special tool 11 5 090 and tighten down.
Draw in new radial seal with special tool 11 1 220 until it is
flush with timing case cover.
RA Replacing radial seal in lower timing case cover (S50 / S54)
BMW AG - TIS
16.02.2013 08:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
